Publications

WaiCAMM

Teams Research and projects Collaborations Publications

Waikato Centre for Advanced Materials and Manufacturing (WaiCAMM)

For an up-to-date list of an individual's publications please visit their home page

2020

  • Alshammari, Y., Jia, M., Yang, F., & Bolzoni, L. (2020). The effect of α+ β forging on the mechanical properties and microstructure of binary titanium alloys produced via a cost-effective powder metallurgy route. Materials Science and Engineering A, 769. doi:10.1016/j.msea.2019.138496

2019

  • Bolzoni, L., & Yang, F. (2019). Development of Cu-bearing powder metallurgy Ti alloys for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 97, 41-48. doi:10.1016/j.jmbbm.2019.05.014 Open Access version: https://hdl.handle.net/10289/12560
  • Alshammari, Y., Yang, F., & Bolzoni, L. (2019). Low-cost powder metallurgy Ti-Cu alloys as a potential antibacterial material. Journal of the Mechanical Behavior of Biomedical Materials, 95, 232-239. doi:10.1016/j.jmbbm.2019.04.004
  • Raynova, S., Collas, Y., Yang, F., & Bolzoni, L. (2019). Advancement in the Pressureless Sintering of CP Titanium Using High-Frequency Induction Heating. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. doi:10.1007/s11661-019-05381-z
  • Yang, F., Pi, Z. Q., Zhao, Q. Y., Raynova, S., Liu, Q., Sharp, K., . . . Qian, M. (2019). Strong and ductile Ti-6Al-4V alloy produced by hot pressing of Ti-6Al-4V swarf. JOM, 71(3), 1056-1061. doi:10.1007/s11837-018-3301-6
  • Zhao, Q., Yang, F., Torrens, R., & Bolzoni, L. (2019). In-situ observation of the tensile deformation and fracture behaviour of powder-consolidated and as-cast metastable beta titanium alloys. Materials Science and Engineering A, 750, 45-59. doi:10.1016/j.msea.2019.02.037
  • Raynova, S., Imam, M. A., Yang, F., & Bolzoni, L. (2019). Hybrid microwave sintering of blended elemental Ti alloys. Journal of Manufacturing Processes, 39, 52-57. doi:10.1016/j.jmapro.2019.02.002
  • Ahmad Sawpan, M., Islam, M. R., Beg, M. D. H., & Pickering, K. (2019). Effect of Accelerated Weathering on Physico-Mechanical Properties of Polylactide Bio-Composites. Journal of Polymers and the Environment, 27(5), 942-955. doi:10.1007/s10924-019-01405-2
  • Jussen, D., Sharma, S., Carson, J. K., & Pickering, K. L. (2019). Preparation and tensile properties of guar gum hydrogel films. Polymers and Polymer Composites. doi:10.1177/0967391119867560
  • Pappu, A., Pickering, K. L., & Thakur, V. K. (2019). Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding. Industrial Crops and Products, 137, 260-269. doi:10.1016/j.indcrop.2019.05.040
  • Aruan Efendy, M. G., & Pickering, K. L. (2019). Comparison of strength and Young modulus of aligned discontinuous fibre PLA composites obtained experimentally and from theoretical prediction models. Composite Structures, 208, 566-573. doi:10.1016/j.compstruct.2018.10.057
  • Singh, A. P., Yang, F., Torrens, R., & Gabbitas, B. (2019). The effect of heat treatment on the mechanical properties of Ti-6Al-4V alloy produced by consolidating a high impurity blended powder mixture using a combination of powder compact hot pressing and extrusion. Journal of Materials Research. doi:10.1557/jmr.2019.26
  • Gavin, C., Verbeek, C. J. R., Lay, M. C., Bier, J. M., & Hicks, T. M. (2019). Thermal analysis and secondary structure of protein fractions in a highly aggregated protein material. Polymer Testing. doi:10.1016/j.polymertesting.2019.04.023
  • Gavin, C., Verbeek, C. J. R., & Lay, M. C. (2019). Formation of secondary structures in protein foams as detected by synchrotron FT-IR. Polymer Testing, 73, 82-86. doi:10.1016/j.polymertesting.2018.10.043
  • Gavin, C., Verbeek, C. J. R., & Lay, M. C. (2019). The role of plasticizers during protein thermoplastic foaming. Journal of Applied Polymer Science, 136(30). doi:10.1002/app.47781
  • Olafsson, G., Tighe, R. C., & Dulieu-Barton, J. M. (2019). Improving the probing depth of thermographic inspections of polymer composite materials. Measurement Science and Technology. doi:10.1088/1361-6501/aaed15
  • Fascetti, A., & Oskay, C. (2019). Dual random lattice modeling of backward erosion piping. Computers and Geotechnics, 105, 265-276. doi:10.1016/j.compgeo.2018.08.018
  • Gaetani, A., Fascetti, A., & Nisticò, N. (2019). Parametric investigation on the tensile response of GFRP elements through a discrete lattice modeling approach. Composites Part B: Engineering, 176, 107254. doi:10.1016/j.compositesb.2019.107254
  • Teo, M. Y., Stuart, L., Devaraj, H., Liu, C. Y., Aw, K. C., & Stringer, J. (2019). The: In situ synthesis of conductive polyaniline patterns using micro-reactive inkjet printing. Journal of Materials Chemistry C, 7(8), 2219-2224. doi:10.1039/c8tc06485g
  • Devaraj, H., Aw, K. C., & McDaid, A. J. (2019). Review of functional materials for potential use as wearable infection sensors in limb prostheses. Biomedical Engineering Letters. doi:10.1007/s13534-019-00132-w
  • Devaraj, H., Yellapantula, K., Stratta, M., McDaid, A., & Aw, K. (2019). Embedded piezoresistive pressure sensitive pillars from piezoresistive carbon black composites towards a soft large-strain compressive load sensor. Sensors and Actuators, A: Physical, 285, 645-651. doi:10.1016/j.sna.2018.12.006
  • Kidgell, J. T., Magnusson, M., de Nys, R., & Glasson, C. R. K. (2019). Ulvan: A systematic review of extraction, composition and function. Algal Research, 39, 20 pages. doi:10.1016/j.algal.2019.101422 Open Access version: https://hdl.handle.net/10289/12611
  • Magnusson, M., Glasson, C. R. K., Vucko, M. J., Angell, A., Neoh, T. L., & de Nys, R. (2019). Enrichment processes for the production of high-protein feed from the green seaweed Ulva ohnoi. Algal Research, 41, 9 pages. doi:10.1016/j.algal.2019.101555
  • Glasson, C. R. K., Donnet, L., Angell, A., Vucko, M. J., Lorbeer, A. J., Vamvounis, G., . . . Magnusson, M. (2019). Multiple response optimisation of the aqueous extraction of high quality ulvan from Ulva ohnoi. Bioresource Technology Reports, 7. doi:10.1016/j.biteb.2019.100262
  • Magnusson, M., Glasson, C. R. K., Vucko, M. J., Angell, A., Neoh, T. L., & de Nys, R. (2019). Enrichment processes for the production of high-protein feed from the green seaweed Ulva ohnoi. Algal Research, 41, 9 pages. doi:10.1016/j.algal.2019.101555
  • Glasson, C. R. K., Donnet, L., Angell, A., Vucko, M. J., Lorbeer, A. J., Vamvounis, G., . . . Magnusson, M. (2019). Multiple response optimisation of the aqueous extraction of high quality ulvan from Ulva ohnoi. Bioresource Technology Reports, 7. doi:10.1016/j.biteb.2019.100262
  • Kidgell, J. T., Magnusson, M., de Nys, R., & Glasson, C. R. K. (2019). Ulvan: A systematic review of extraction, composition and function. Algal Research, 39, 20 pages. doi:10.1016/j.algal.2019.101422 Open Access version: https://hdl.handle.net/10289/12611

2018

  • Fascetti, A., Bolander, J. E., & Nisticó, N. (2018). Lattice discrete particle modeling of concrete under compressive loading: Multiscale experimental approach for parameter determination. Journal of Engineering Mechanics, 144(8), 04018058. doi:10.1061/(ASCE)EM.1943-7889.0001480
  • Gavin, C., Verbeek, C. J. R., & Lay, M. C. (2018). Morphology and compressive behaviour of foams produced from thermoplastic protein. Journal of Materials Science. doi:10.1007/s10853-018-2714-5
  • Yang, F., Sun, W., Singh, A., & Bolzoni, L. (2018). Effect of minor titanium addition on copper/diamond composites prepared by hot forging. JOM Journal of the Minerals, Metals and Materials Society, 1-6. doi:10.1007/s11837-018-2815-2 Open Access version: https://hdl.handle.net/10289/11905
  • Pal Singh, A., Yang, F., Torrens, R., Gabbitas, B., & Bolzoni, L. (2018). Cost-effective production of high-property titanium alloy from powder. In Materials Science Forum Vol. 941 (pp. 1088-1094). Conference held Paris, France: Scientific.Net.
  • Singh, A. P., Yang, F., Torrens, R., & Gabbitas, B. (2018). Solution treatment of Ti-6Al-4V alloy produced by consolidating blended powder mixture using a powder compact extrusion route. Materials Science and Engineering A, 712, 157-165. doi:10.1016/j.msea.2017.11.098
  • Jia, M., Blanchard, C., & Bolzoni, L. (2018). Microstructure and mechanical properties of Ti-5Al-2.5Fe alloy produced by powder forging. Key Engineering Materials, 770, 39-44. doi:10.4028/www.scientific.net/KEM.770.39 Open Access version: https://hdl.handle.net/10289/11900
  • Liang, J. M., Zhang, Z., Jia, M. T., Cao, L., Li, C. G., Gao, H. Y., . . . Zhang, D. L. (2018). The microstructures and tensile mechanical properties of ultrafine grained and coarse grained Al-7Si-0.3Mg alloy rods fabricated from machining chips. Materials Science and Engineering: A, 729, 29-36. doi:10.1016/j.msea.2018.05.047
  • Jia, M. T., Gabbitas, B., & Bolzoni, L. (2018). Evaluation of reactive induction sintering as a manufacturing route for blended elemental Ti-5Al-2.5Fe alloy. Journal of Materials Processing Technology, 255, 611-620. doi:10.1016/j.jmatprotec.2018.01.013 Open Access version: https://hdl.handle.net/10289/11903
  • Leveneur, J., Rajan, A., McDonald-Wharry, J., Le Guen, M. -J., Pickering, K., & Kennedy, J. (2018). Structural and chemical changes of cellulose fibres under low energy ion implantations. Surface and Coatings Technology. doi:10.1016/j.surfcoat.2018.04.006
  • Devaraj, H., Pook, C., Swift, S., Aw, K. C., & McDaid, A. J. (2018). Profiling of headspace volatiles from Escherichia coli cultures using silicone-based sorptive media and thermal desorption GC–MS. Journal of Separation Science, 41(22), 4133-4141. doi:10.1002/jssc.201800684
  • Machado, L., Tomkins, N., Magnusson, M., Midgley, D. J., de Nys, R., & Rosewarne, C. P. (2018). In vitro response of rumen microbiota to the antimethanogenic red macroalga Asparagopsis taxiformis. Microbial Ecology, 75(3), 811-818. doi:10.1007/s00248-017-1086-8